If you’re a Nikon SB 600 user looking to manually turn on AF-AI, you’ll be happy to know it’s a relatively straightforward process. AF-AI, which stands for auto focusing assist illuminator, is a feature that helps enhance the camera’s ability to focus in low light conditions by emitting a red light beam to help the camera lock onto subjects. Here’s a step-by-step guide on how to manually turn on AF-AI in the Nikon SB 600.
Step 1: Power on the Flash
Make sure the Nikon SB 600 is turned on. The power switch is located on the left side of the flash. Slide the switch to the on position to power up the flash.
Step 2: Access the Menu
Once the flash is turned on, access the menu by pressing the “SEL” button on the back of the flash. This will allow you to navigate through the settings and make adjustments.
Step 3: Navigate to Custom Settings
Use the arrow buttons around the “SEL” button to navigate through the menu until you find the “Custom Settings” option. Press the “SEL” button to enter the custom settings menu.
Step 4: Select AF-AI
Within the custom settings menu, navigate to the AF-AI option using the arrow buttons. Once you have located AF-AI, press the “SEL” button to enter the AF-AI sub-menu.
Step 5: Turn AF-AI On
Once inside the AF-AI sub-menu, use the arrow buttons to select the “on” option. Press the “SEL” button to confirm and activate the AF-AI feature.
Step 6: Exit the Menu
After turning on AF-AI, exit the menu by pressing the “MODE” button. This will take you back to the main display, and you will now be ready to use the flash with the AF-AI feature activated.
Now that you have manually turned on AF-AI in your Nikon SB 600, you can benefit from improved focusing in low light conditions. Remember, the AF-AI feature is designed to assist the camera in focusing and is especially useful in situations where light is limited. By following these simple steps, you can make the most of the AF-AI feature and ensure that your Nikon SB 600 is ready to capture sharp, well-focused images in any lighting conditions.
